Skip to main content

UIviewcontroller size issue in IPhone?

Image
By User



I have a UIviewcontroller in a navigation based project, to which i am pushing some views as a result of some button action.





When I first load this view, its size is showing (0,0,320,416) in the viewwillappear method. But, if you run it again, its size is showing (0,0,320,460) in the same viewwillappear method. My view is seems to be resizing when you load it again.





Due to that I have so many problems in the pushed view. Can anybody help me please?


Labels:

Comments

  1. Tips For AllFebruary 21, 2012 at 2:14 PM

    (0,0,320,416) is - 20 for status bar and - 44 for navigation bar and (0,0,320,460) is just the -20 for the status bar, perhaps your navigation bar is translucent?.

    ReplyDelete
  2. Tips For AllFebruary 21, 2012 at 2:14 PM

    the difference between two sizes is 44 .. which is the height of the navigation bar ,, i think your problem in the navigation controller or you are set it translucent.

    ReplyDelete

Post a Comment

Popular posts from this blog

Slow Android emulator

By User
I have a 2.67 GHz Celeron processor, 1.21 GB of RAM on a x86 Windows XP Professional machine. My understanding is that the Android emulator should start fairly quickly on such a machine, but for me it does not. I have followed all instructions in setting up the IDE, SDKs, JDKs and such and have had some success in staring the emulator quickly but is very particulary. How can I, if possible, fix this problem?
30 comments
Read more

CCNA 1 Final Exam 2011 latest (hot hot hot)

By User
  Hi! I have been posted content of ccna1 final exam (latest and only question.) I will post the answer and insert image on sunday. If you care, please subscribe your email an become a first person have full test content. Subcribe now  Some question  have not content because this question have images content. So that can you wait for me? SUNDAY 1. A user sees the command prompt: Router(config-if)# . What task can be performed at this mode? Reload the device. Perform basic tests. Configure individual interfaces. Configure individual terminal lines. 2. Refer to the exhibit. Host A attempts to establish a TCP/IP session with host C. During this attempt, a frame was captured with the source MAC address 0050.7320.D632 and the destination MAC address 0030.8517.44C4. The packet inside the captured frame has an IP source address 192.168.7.5, and the destination IP address is 192.168.219.24. At which point in the network was this packet captured? leaving host A leaving ATL leaving...
114 comments
Read more