CCNA, CCNP, MCSA, CCNA Final Exam, All Answer Test Module With 100/100

CCNA Exploration version 4.0 ERouting final exam CCNA1 ERouting Final 3a Answer mark is (*).  1. Which three statements are true regarding the encapsulation and de-encapsulation of packets when traveling through a router? (Choose three.) (*)The router modifies the TTL field, decrementing it by one. The router changes the source IP to the IP of the exit interface. (*)The router maintains the same source and destination IP. (*)The router changes the source physical address to the physical address of the exit interface. The router changes the destination IP to the IP of the exit interface. The router sends the packet out all other interfaces, besides the one it entered the router on. 2. Refer to the exhibit. Packets destined to which two networks will require the router to perform a recursive lookup? (Choose two.) (*)10.0.0.0/8 64.100.0.0/16 128.107.0.0/16 172.16.40.0/24 192.168.1.0/24 (*)192.168.2.0/24 3. Which two statements are correct about the split horizon with poison reverse ...

Backing Up the Cisco Router Configuration To copy the router’s configuration from a router to a TFTP server, you can use either the copy running-config tftp or the copy startup-config tftp command. Either one will back up the router configuration that’s currently running in DRAM, or that’s stored in NVRAM. Verifying the Current Configuration To verify the configuration in DRAM, use the show running-config command (sh run for short) like this: Router#sh run Building configuration… Current configuration: ! version 12.0 The current configuration information indicates that the router is now running version 12.0 of the IOS. Verifying the Stored Configuration Next, you should check the configuration stored in NVRAM. To see this, use the show startup-config command (sh start for short) like this: Router#sh start Using 366 out of 32762 bytes ! version 11.2 The second line shows you how much room your backup configuration is using. Here, we can see that NVRAM is 32KB and that only 366 bytes...

To make changes to an interface, you use the interface command from global configuration mode: Router(config)#interface ? Async Async interface BVI Bridge-Group Virtual Interface CTunnel CTunnel interface Dialer Dialer interface FastEthernet FastEthernet IEEE 802.3 Group-Async Async Group interface Lex Lex interface Loopback Loopback interface MFR Multilink Frame Relay bundle interface Multilink Multilink-group interface Null Null interface Serial Serial Interface Tunnel Tunnel interface Vif PGM Multicast Host interface Virtual-Template Virtual Template interface Virtual-TokenRing Virtual TokenRing Interface range interface range command Router(config)#interface fastethernet 0/0 Router(config-if)# Did you notice that the prompt changed to Router(config-if)#? This tells you that you’re in interface configuration mode. And wouldn’t it be nice if the prompt also gave you an indication of what interface you were configuring? Well, at l...

There are five passwords used to secure your Cisco routers: console, auxiliary, telnet (VTY), enable password, and enable secret. Just as you learned earlier in the chapter, the first two passwords are used to set your enable password that’s used to secure privileged mode. This will prompt a user for a password when the enable command is used. The other three are used to configure a password when user mode is accessed either through the console port, through the auxiliary port, or via Telnet. Enable Passwords You can set the enable passwords from global configuration mode like this: Router(config)#enable ? last-resort Define enable action if no TACACS servers respond password Assign the privileged level password secret Assign the privileged level secret use-tacacs Use TACACS to check enable passwords The following points describe the enable password parameters: Last-resort Allows you to still enter the router if you set up authentication through a TACACS server and it’s not avail...

Joboshare PSP Video Converter is designed for users who want to convert video to Sony PSP and enjoy the converted files on Sony PSP . It can both convert video to PSP movie (PSP MP4 video, PSP H.264/AVC video), PS3 Video MPEG-4 (480p, 720p, 1080i) and extract audio from video to MP3 and M4A. Joboshare PSP Video Converter support almost all popular video formats such as AVI, MPEG , WMV, DivX, MOV, RM, DAT, VOB, 3GP, and so on. Joboshare PSP Video Converter provides you with various options to edit your video files, such as trimming file length, converting multiple files at a time, customizing video and audio output settings, preview movie before conversion and so on. Turn your Sony PSP player into a 16:9 wide screen movie theatre with Joboshare PSP Video Converter now! Key Features: 1. Convert video to PSP video Convert almost all video formats to Sony PSP movie (PSP MP4 video, PSP H.264/AVC video), PS3 Video MPEG-4 (480p, 720p, 1080i). Video formats include AVI, MPEG, WMV, DivX, MO...

SoftPerfect Network Protocol Analyzer is an advanced, professional tool for analyzing, debugging, maintaining and monitoring local networks and Internet connections. It captures the data passing through your dial-up connection or network Ethernet card, analyzes this data and then represents it in an easily readable form. SoftPerfect Network Protocol Analyzer is a useful tool for network administrators, security specialists, network application developers and anyone who needs a comprehensive picture of the traffic passing through their network connection or segment of a local area network. SoftPerfect Network Protocol Analyzer presents the results of its network analysis in a convenient and easily understandable format. It also allows you to defragment and reassemble network packets into streams. The program can easily analyze network traffic based on a number of different Internet protocols as listed below. SoftPerfect Network Protocol Analyzer features full decoding of the followi...

LAN Search Pro 8.4.0 description LAN Search Pro 8.4.0 supports a method to find out files on your network . It helps you save your time and money when you need to find some information in your LAN. It features include a very fast multi-threaded search engine, ability to search hidden network resources , restricted access resources and IP sub-networks and much more. Major Features: Search according to the specified criteria, search filters. Ability to search the hidden resources, IP sub-networks, LAN FTP servers. Ability to search the resources with restricted access (the ones you need a login and password to access). Ability to ignore some computers (e.g. slow servers) when performing the search. You can also search for specific servers only. Ability to search specific network folders and much more. Save, load, sort, navigate, and perform any other actions on the search results. Fast multi-threaded search engine Support of large amounts of data the list can now contain up to 2,000,00...