Skip to main content

Can we turn on/off the GPS programatically in iPhone?



I want to know can we turn on/off the GPS programmatically in iPhone?




Comments

  1. A simple example:

    //Init location manager

    CLLocationManager* locationManager = [ [ CLLocationManager alloc] init];
    CLLocationManager* locationManager.delegate = self; //we must implement the protocol

    //Choose your accuracy level

    //To turn on gps (if it isn't on already)
    [locationManager startUpdatingLocation];

    //To turn gps off (if no other apps are listening)
    [locationManager stopUpdatingLocation];


    There is more than this, and you can monitor more or less accuracy, and even use wifi/ cell towers. Please read the example first for best usage.

    ReplyDelete
  2. Well the GPS will be turned on if you use the CLLocationManager.

    The locationmanager will first start by getting the location via triangulation and then turn the GPS to get a more precise fix.

    ReplyDelete

Post a Comment

Popular posts from this blog

Slow Android emulator

I have a 2.67 GHz Celeron processor, 1.21 GB of RAM on a x86 Windows XP Professional machine. My understanding is that the Android emulator should start fairly quickly on such a machine, but for me it does not. I have followed all instructions in setting up the IDE, SDKs, JDKs and such and have had some success in staring the emulator quickly but is very particulary. How can I, if possible, fix this problem?

CCNA 1 Final Exam 2011 latest (hot hot hot)

  Hi! I have been posted content of ccna1 final exam (latest and only question.) I will post the answer and insert image on sunday. If you care, please subscribe your email an become a first person have full test content. Subcribe now  Some question  have not content because this question have images content. So that can you wait for me? SUNDAY 1. A user sees the command prompt: Router(config-if)# . What task can be performed at this mode? Reload the device. Perform basic tests. Configure individual interfaces. Configure individual terminal lines. 2. Refer to the exhibit. Host A attempts to establish a TCP/IP session with host C. During this attempt, a frame was captured with the source MAC address 0050.7320.D632 and the destination MAC address 0030.8517.44C4. The packet inside the captured frame has an IP source address 192.168.7.5, and the destination IP address is 192.168.219.24. At which point in the network was this packet captured? leaving host A leaving ATL leaving...