CCNA, CCNP, MCSA, CCNA Final Exam, All Answer Test Module With 100/100

1 Refer to the exhibit. The network administrator needs to setup Switch1 for remote access from HostA. The show ip interface brief is issued on Router1 and the show interfaces trunk command is issued on the Switch1 to verify the current status. The administrator applies the additional configuration shown in the exhibit to Switch1. However, the telnet from HostA fails. What additional commands need to be applied to the switch? Switch(config)# interface vlan 1 Switch(config-if)# ip address 10.1.1.250 255.255.255.0 Switch(config-if)# no shutdown Switch(config-if)# ip default-gateway 10.1.10.254 Switch(config)# interface vlan 1 Switch(config-if)# ip address 10.1.50.250 255.255.255.0 Switch(config-if)# no shutdown Switch(config-if)# ip default-gateway 10.1.50.254 Switch(config)# interface vlan 10 Switch(config-if)# ip address 10.1.10.250 255.255.255.0 Switch(config-if)# no shutdown Switch(config-if)# ip default-gateway 10.1.10.254 ==> Switch(config)# interface vlan 10 Switch(config-if)#

CCNA3 Final latest version Download here good luck! if you like this post, please bookmark this site. thanks

1 Refer to the exhibit. The network administrator needs to setup Switch1 for remote access from HostA. The show ip interface brief is issued on Router1 and the show interfaces trunk command is issued on the Switch1 to verify the current status. The administrator applies the additional configuration shown in the exhibit to Switch1. However, the telnet from HostA fails. What additional commands need to be applied to the switch? Switch(config)# interface vlan 1 Switch(config-if)# ip address 10.1.1.250 255.255.255.0 Switch(config - if)# no shutdown Switch(config-if)# ip default-gateway 10.1.10.254 Switch(config)# interface vlan 1 Switch(config-if)# ip address 10.1.50.250 255.255.255.0 Switch(config-if)# no shutdown Switch(config-if)# ip default-gateway 10.1.50.254 Switch(config)# interface vlan 10 Switch(config-if)# ip address 10.1.10.250 255.255.255.0 Switch(config-if)# no shutdown Switch(config-if)# ip default-gateway 10.1.10.254 ==> Switch(config)# interface vlan 10 Switch(config-if)

1 Refer to the graphic. Which of the following commands would be used on the router to provide communication between the two hosts connected to the switch? interface vlan 2 ip address 192.168.2.1 255.255.255.0 no shutdown interface vlan 3 ip address 192.168.3.1 255.255.255.0 no shutdown *** interface fastethernet 0/0 no shutdown interface fastethernet 0/0.2 encapsulation dot1q 2 ip address 192.168.2.1 255.255.255.0 interface fastethernet 0/0.3 encapsulation dot1q 3 ip address 192.168.3.1 255.255.255.0 interface vlan 2 switchport mode trunk dot1q interface vlan 3 switchport mode trunk dot11 interface fastethernet 0/0 mode trunk dot1q 2 3 ip address 192.168.2.1 255.255.255.0 2 Refer to the graphic. If the switches are new and have been cabled as shown, which switch will become the root bridge? *** SC CE JB JP JN cannot be determined from the information given 3 A switch is operating in VTP client mode. What is true about the operations that can be performed by the switch? VLANs that are

1. Refer to the exhibit. The network administrator needs to setup Switch1 for remote access from HostA. Theshow ip interface brief is issued on Router1 and the show interfaces trunk command is issued on theSwitch1 to verify the current status. The administrator applies the additional configuration shown in theexhibit to Switch1. However, the telnet from HostA fails. What additional commands need to be appliedto the switch? • Switch(config)# interface vlan 1 Switch(config-if)# ip address 10.1.1.250 255.255.255.0 Switch(config-if)# no shutdown Switch(config-if)# ip default-gateway 10.1.10.254 • Switch(config)# interface vlan 1 Switch(config-if)# ip address 10.1.50.250 255.255.255.0 Switch(config-if)# no shutdown Switch(config-if)# ip default-gateway 10.1.50.254 • Switch(config)# interface vlan 10 Switch(config-if)# ip address 10.1.10.250 255.255.255.0 Switch(config-if)# no shutdown Switch(config-if)# ip default-gateway 10.1.10.254 • Switch(config)# interface vlan 10 Switch(config-if)# ip