Skip to main content

Posts

Showing posts with the label NEW CCNA3 FINAL

CCNA3 Final 2010

Link to this site if you copy my content. Thank Petter ! 1 . Which security protocol or measure would provide the greatest protection for a wireless LAN? WPA2 cloaking SSIDs shared WEP key MAC address filtering 2 . Refer to the exhibit. All trunk links are operational and all VLANs are allowed on all trunk links. An ARP request is sent by computer 5. Which device or devices will receive this message? only computer 4 computer 3 and RTR-A computer 4 and RTR-A computer 1, computer 2, computer 4, and RTR-A computer 1, computer 2, computer 3, computer 4, and RTR-A all of the computers and the router 3 . Refer to the exhibit. Hosts A and B, connected to hub HB1, attempt to transmit a frame at the same time but a collision occurs. Which hosts will receive the collision jamming signal? only hosts A and B only hosts A, B, and C only hosts A, B, C, and D only hosts A, B, C, and E 4 . Refer to the exhibit. Router RA receives a packet with a source address of 192.168.1.65 and a destinatio

CCNA3 Final

1 Refer to the exhibit. The network administrator needs to setup Switch1 for remote access from HostA. The show ip interface brief is issued on Router1 and the show interfaces trunk command is issued on the Switch1 to verify the current status. The administrator applies the additional configuration shown in the exhibit to Switch1. However, the telnet from HostA fails. What additional commands need to be applied to the switch? Switch(config)# interface vlan 1 Switch(config-if)# ip address 10.1.1.250 255.255.255.0 Switch(config-if)# no shutdown Switch(config-if)# ip default-gateway 10.1.10.254 Switch(config)# interface vlan 1 Switch(config-if)# ip address 10.1.50.250 255.255.255.0 Switch(config-if)# no shutdown Switch(config-if)# ip default-gateway 10.1.50.254 Switch(config)# interface vlan 10 Switch(config-if)# ip address 10.1.10.250 255.255.255.0 Switch(config-if)# no shutdown Switch(config-if)# ip default-gateway 10.1.10.254 ==> Switch(config)# interface vlan 10 Switch(config-if)#

NEW CCNA3 FINAL

http://p4s-ccna.blogspot.com http://testccna-4u.blogspot.com 1. Refer to the exhibit. An administrator documented the output of a CAM table from an Ethernet switch as shown. What action will the switch take when it receives the frame shown at the bottom of the exhibit? discard the frame forward the frame out port 2 forward the frame out port 3 forward the frame out all ports ***forward the frame out all ports except port 3 add station 00-00-3D-1F-11-05 to port 2 in the forwarding table 2.Refer to the exhibit. What does the term DYNAMIC indicate in the output that is shown? This entry can only be removed from the MAC address table by a network administrator. When forwarding a frame to the device with address 0060.5c5b.cd23,the switch does not have to perform a lookup to determine Only the device with MAC address 0060.5c5b.cd23 will be allowed to connect to port Fa0/18 ***The switch learned this MAC address from the source address in a frame received on Fa0/18 3. A new switch is to be a