Skip to main content

CCNA 1 - Module 6



89,4%

1

How many bits make up an IPv4 address?



128

64

48

32



2

Refer to the exhibit. A network administrator has to develop an IP addressing scheme that uses the 192.168.1.0 /24 address space. The network that contains the serial link has already been addressed out of a separate range. Each network will be allocated the same number of host addresses. Which network mask will be appropriate to address the remaining networks?



255.255.255.248

255.255.255.224

255.255.255.192

255.255.255.240

255.255.255.128

255.255.255.252





3

Refer to the exhibit. The network administrator has assigned the internetwork of LBMISS an address range of 192.168.10.0. This address range has been subnetted using a /29 mask. In order to accommodate a new building, the technician has decided to use the fifth subnet for configuring the new network (subnet zero is the first subnet). By company policies, the router interface is always assigned the first usable host address and the workgroup server is given the last usable host address. Which configuration should be entered into the workgroup server's properties to allow connectivity to the network?



IP address: 192.168.10.38 subnet mask: 255.255.255.240 default gateway: 192.168.10.39

IP address: 192.168.10.38 subnet mask: 255.255.255.240 default gateway: 192.168.10.33

IP address: 192.168.10.38 subnet mask: 255.255.255.248 default gateway: 192.168.10.33

IP address: 192.168.10.39 subnet mask: 255.255.255.248 default gateway: 192.168.10.31

IP address: 192.168.10.254 subnet mask: 255.255.255.0 default gateway: 192.168.10.1





4

Refer to the exhibit. Which network prefix will work with the IP addressing scheme shown in the graphic.



/24

/16

/20

/27

/25

/28





5

Refer to the exhibit. A network administrator discovers that host A is having trouble with Internet connectivity, but the server farm has full connectivity. In addition, host A has full connectivity to the server farm. What is a possible cause of this problem?



The router has an incorrect gateway.

Host A has an overlapping network address.

Host A has an incorrect default gateway configured.

Host A has an incorrect subnet mask.

NAT is required for the host A network.





6

What subnet mask would a network administrator assign to a network address of 172.30.1.0 if it were possible to have up to 254 hosts?



255.255.0.0

255.255.255.0

255.255.254.0

255.255.248.0





7

Given the IP address and subnet mask of 172.16.134.64 255.255.255.224, which of the following would describe this address?



This is a useable host address.

This is a broadcast address.

This is a network address.

This is not a valid address.





8

What three facts are true about the network portion of an IPv4 address? (Choose three.)



identifies an individual device

is identical for all hosts in a broadcast domain

is altered as packet is forwarded

varies in length

is used to forward packets

uses flat addressing





9

What is the network address of the host 172.25.67.99 /23 in binary?



10101100. 00011001.01000011.00000000

10101100. 00011001.01000011.11111111

10101100. 00011001.01000010.00000000

10101100. 00011001.01000010.01100011

10101100. 00010001.01000011. 01100010

10101100. 00011001.00000000.00000000





10

A router interface has been assigned an IP address of 172.16.192.166 with a mask of 255.255.255.248. To which subnet does the IP address belong?



172.16.0.0

172.16.192.0

172.16.192.128

172.16.192.160

172.16.192.168

172.16.192.176





11

Refer to the exhibit. Why would the response shown be displayed after issuing the command ping 127.0.0.1 on a PC?



The IP settings are not properly configured on the host.

Internet Protocol is not properly installed on the host.

There is a problem at the physical or data link layer.

The default gateway device is not operating.

A router on the path to the destination host has gone down.





12

What two things will happen if a router receives an ICMP packet which has a TTL value of 1 and the destination host is several hops away? (Choose two.)



The router will discard the packet.

The router will decrement the TTL value and forward the packet to the next router on the path to the destination host.

The router will send a time exceeded message to the source host.

The router will increment the TTL value and forward the packet to the next router on the path to the destination host.

The router will send an ICMP Redirect Message to the source host.





13

Refer to the exhibit. An administrator is designing security rules for the 192.168.22.0 /24 network. Each security rule requires an address and mask pair to represent the machines that will be affected by the rule. Which two address and mask pairs will be the most precise way to reference the servers and hosts separately. (Choose two.)



192.168.22.40 255.255.255.248

192.168.22.40 255.255.255.252

192.168.22.100 255.255.255.128

192.168.22.100 255.255.255.254

192.168.22.1 255.255.255.192

192.168.22.101 255.255.255.224





14

Which of the following are features of IPv6? (Choose three.)



larger address space

faster routing protocols

data types and classes of service

authentication and encryption

improved host naming conventions

same addressing scheme as IPv4





15

Which process do routers use to determine the subnet network address based upon a given IP address and subnet mask?



binary adding

hexadecimal anding

binary division

binary multiplication

binary ANDing





16

What is the primary reason for development of IPv6?



security

header format simplification

expanded addressing capabilities

addressing simplification





17

Which three IP addresses are private? (Choose three.)



172.168.33.1

10.35.66.70

192.168.99.5

172.18.88.90

192.33.55.89

172.35.16.5





18

Which statements are true regarding IP addressing? (Choose two.)



NAT translates public addresses to private addresses destined for the Internet.

Only one company is allowed to use a specific private network address space.

Private addresses are blocked from public Internet by router.

Network 172.32.0.0 is part of the private address space.

IP address 127.0.0.1 can be used for a host to direct traffic to itself.





19

Which IPv4 subnetted addresses represent valid host addresses? (Choose three.)



172.16.4.127 /26

172.16.4.155 /26

172.16.4.193 /26

172.16.4.95 /27

172.16.4.159 /27

172.16.4.207 /27





20

What is a group of hosts called that have identical bit patterns in the high order bits of their addresses?



an internet

a network

an octet

a radi





21

Refer to the exhibit. Host A is connected to the LAN, but it cannot get access to any resources on the Internet. The configuration of the host is shown in the exhibit. What could be the cause of the problem?



The host subnet mask is incorrect.

The default gateway is a network address.

The default gateway is a broadcast address.

The default gateway is on a different subnet from the host.





22

Which of the following network devices are recommended to be assigned static IP addresses? (Choose three.)



LAN workstations

servers

network printers

routers

remote workstations

laptops







Comments

  1. This are not all correct. Lot's of mistakes.

    ReplyDelete

Post a Comment

Popular posts from this blog

[韓日関係] 首相含む大幅な内閣改造の可能性…早ければ来月10日ごろ=韓国

div not scrolling properly with slimScroll plugin

I am using the slimScroll plugin for jQuery by Piotr Rochala Which is a great plugin for nice scrollbars on most browsers but I am stuck because I am using it for a chat box and whenever the user appends new text to the boxit does scroll using the .scrollTop() method however the plugin's scrollbar doesnt scroll with it and when the user wants to look though the chat history it will start scrolling from near the top. I have made a quick demo of my situation http://jsfiddle.net/DY9CT/2/ Does anyone know how to solve this problem?

Why does this javascript based printing cause Safari to refresh the page?

The page I am working on has a javascript function executed to print parts of the page. For some reason, printing in Safari, causes the window to somehow update. I say somehow, because it does not really refresh as in reload the page, but rather it starts the "rendering" of the page from start, i.e. scroll to top, flash animations start from 0, and so forth. The effect is reproduced by this fiddle: http://jsfiddle.net/fYmnB/ Clicking the print button and finishing or cancelling a print in Safari causes the screen to "go white" for a sec, which in my real website manifests itself as something "like" a reload. While running print button with, let's say, Firefox, just opens and closes the print dialogue without affecting the fiddle page in any way. Is there something with my way of calling the browsers print method that causes this, or how can it be explained - and preferably, avoided? P.S.: On my real site the same occurs with Chrome. In the ex