1. Refer to the exhibit. The network administrator needs to setup Switch1 for remote access from HostA. Theshow ip interface brief is issued on Router1 and the show interfaces trunk command is issued on theSwitch1 to verify the current status. The administrator applies the additional configuration shown in theexhibit to Switch1. However, the telnet from HostA fails. What additional commands need to be appliedto the switch? • Switch(config)# interface vlan 1 Switch(config-if)# ip address 10.1.1.250 255.255.255.0 Switch(config-if)# no shutdown Switch(config-if)# ip default-gateway 10.1.10.254 • Switch(config)# interface vlan 1 Switch(config-if)# ip address 10.1.50.250 255.255.255.0 Switch(config-if)# no shutdown Switch(config-if)# ip default-gateway 10.1.50.254 • Switch(config)# interface vlan 10 Switch(config-if)# ip address 10.1.10.250 255.255.255.0 Switch(config-if)# no shutdown Switch(config-if)# ip default-gateway 10.1.10.254 • Switch(config)# interface vlan 10 Switch(config-if)# ip
Cisco Certified Network Associate Exam,640-802 CCNA All Answers ~100/100. Daily update