CCNA, CCNP, MCSA, CCNA Final Exam, All Answer Test Module With 100/100

1. A network administrator is asked to design a system to allow simultaneous access to the Internet for 250 users. The ISP for this network can only supply five public IPs. What can be used to accomplish this task? • routable translation • dynamic translation • static translation • port address translation 2. The LAN attached to the Ethernet interface of the Raleigh router shown in the graphic is addressed with private IP addresses. If one public IP is assigned to the company, which commands could be used in a configuration that allows all devices with private IPs in this network to access the Internet? (Choose two.) • ip nat inside source list 1 interface serial0 overload • ip nat outside source list 1 interface serial0 overload • ip nat inside serial0 • ip nat inside source list 1 pool Raleigh overload • ip nat inside Raleigh overload • ip inside nat source list 1 interface serial0 Raleigh 3. The command output shown in the graphic was taken from a Cisco 806 broadband router. Which k

1. Identify the factors that contribute to congestion on an Ethernet LAN. (Choose three.) • improper placement of enterprise level servers • addition of hosts to a physical segment • replacement of hubs with workgroup switches • increasing use of bandwidth intensive network applications • migration to full-duplex Ethernet within the LAN 2. Which of the following are examples of TCP/IP application layer protocols? (Choose three.) • a terminal emulation protocol that supports remote console connections with various network devices • a protocol created by IBM that makes it easier for mainframes to connect to remote offices • a protocol responsible for transporting electronic mail on TCP/IP networks and the Internet • a protocol that controls the rate at which data is sent to another computer • a protocol that exchanges network management information between a network device and a management console 3. Which of the following eliminates switching loops? • hold-down timers • poison reverse •

1. Which of the following describes the roles of devices in a WAN? (Choose three.) • A CSU/DSU terminates a digital local loop. • A modem terminates a digital local loop. • A CSU/DSU terminates an analog local loop. • A modem terminates an analog local loop. • A router is commonly considered a DTE device. • A router is commonly considered a DCE device. 2. What value in the address field of a Frame Relay header identifies the destination of the frame? • CIR • DE • DLCI • ISDN • FRAD • PVC 3. The serial PPP link between the Left and Right routers is configured as shown in the diagram. Which configuration issue explains why the link is unable to establish a PPP session? • The IP addresses must be on different subnets. • The usernames are misconfigured. • The passwords must be different for the CHAP authentication. • The clock rate must be 56000. • The clock rate is configured on the wrong end of the link. • Interface serial 0/0 on Left must connect to interface serial 0/1 on Right. 4. The

THIS EXAM IS (80%) What is accomplished by segmenting a LAN with a bridge? *increase large collision domains reduce large collision domains reduce small broadcast domains increase small broadcast domains 2 How many Telnet sessions can take place simultaneously on a router running a standard edition of the IOS? 4 *5 8 10 3 What is a disadvantage of cut-through switching? *no error checking a decrease in error checking decrease in number of collision domains decrease in bandwidth increased latency 4 Which of the following are data link layer encapsulation details? (Choose two.) *Packets are put into frames. Data is packaged into a packet. Data is segmented into segments. Data is converted for Internet travel. *An address is added to identify the directly connected device. 5 Select the characteristics specified by 10BaseT. (Choose three.) *twisted pair cable T style connectors *baseband transmission 10 gigabits per second data rate *10 megabits per second data rate decimal encoded data tr

1. Identify the factors that contribute to congestion on an Ethernet LAN. (Choose three.) • improper placement of enterprise level servers • addition of hosts to a physical segment replacement of hubs with workgroup switches • increasing use of bandwidth intensive network applications migration to full-duplex Ethernet within the LAN 2. Which of the following are examples of TCP/IP application layer protocols? (Choose three.) • a terminal emulation protocol that supports remote console connections with various network devices a protocol created by IBM that makes it easier for mainframes to connect to remote offices • a protocol responsible for transporting electronic mail on TCP/IP networks and the Internet a protocol that controls the rate at which data is sent to another computer • a protocol that exchanges network management information between a network device and a management console 3. Which of the following eliminates switching loops? hold-down timers poison reverse • spanning tr